Nazgul Evoque F5: FPV drone with a new design approach | HITECHGLOBE

Nazgul Evoque F5: FPV drone with a new design approach

adminAugust 2, 20218min780
adminAugust 2, 20218min780
iFlight_Nazgul_Evoque_F5_FPV_drone.jpg
iFlight just announced another 5″ FPV drone with an impressive design that includes cool LED lights and an injection-molded body. The Nazgul Evoque F5 is available with two power options (4S and 6S) and analog or FPV digital FPV. The frame structure is available with Squashed-X (F5X) or DeadCat (F5D) arm layout. The digital iFlight […]


iFlight just announced another 5″ FPV drone with an impressive design that includes cool LED lights and an injection-molded body. The Nazgul Evoque F5 is available with two power options (4S and 6S) and analog or FPV digital FPV. The frame structure is available with Squashed-X (F5X) or DeadCat (F5D) arm layout.

The digital iFlight Nazgul Evoque F5 comes equipped with the recently released Caddx Polar HD transmission system. The Polar FPV camera has excellent low-light performance and it was specially optimized for night flights. 

#AD: Banggood drone sales

The new side panels will not only protect from wetness but also protect the internal electronics from any strikes hitting off little components from your flight controller or ESC board. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

iFlight Nazgul Evoque F5 highlights

  • Two geometry options: Squashed-X or DeadCat;
  • Analog and Digital FPV versions;
  • 360-degree ilumination for night flights;
  • Bottom to top distance: 28mm
  • 6mm Arm thickness and 2.5mm bottom plate thickness
  • SucceX- E Mini F7 flight controller;
  • SucceX-E Mini 45A BLHeli32 ESC;
  • XING-E Pro 2207 4S/6S brushless motors;
  • Nazgul F5 5-inch propellers;
  • FPV system
    • Analog: SucceX Mini Micro 600mW 5.8GHz VTX
    • Digital: Caddx Polar Vista HD System
  • Weight: 392.6g (without battery and GoPro mount);

Technical specs

Nazgul Evoque F5 technical specs

SucceX-E Mini F7 flight controller

  • MCU: STM32F22RET6 216 MHz
  • Gyro: MPU6000
  • Baro: DSP310
  • OSD: iFLIGHT OSD (AT7456E)
  • BEC: 5V 2.5A
  • BlackBox: 16MB
  • Uart: 4*UART(UART1、UART2、UART4、UART5)
  • UART1 for VTX HD/Analog Telemetry
  • UART2 for Receiver
  • UART4 for GPS
  • UART5 for ESC Telemetry
  • 4×Dshot/PWM outputs
  • SmartAudio & IRC Tramp VTX protocol supported
  • WS2812 led Strip: Yes
  • Bepper: Yes
  • Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
  • Outer Size: 27*27mm / 20*20mm φ3 mounting
  • Weight: 4.9g

SucceX-E Mini 45A ESC

  • Input: 2-6s LiPoly
  • Constant: 45 Amps (per channel)
  • Burst: 55 Amps (per channel)
  • BEC: No
  • BlHeli32 telemetry: Yes
  • Dimensions: 31×29.5mm
  • Mounting Holes: 20*20mm φ3mm with Grommets φ2mm
  • Weight: 6.7g (without motor wires)
  • Target: iFlight-G071-4IN1
Box content
  • Nazgul Evoque F5 (Squashed X or DeadCat Pattern)
  • 4 x Nazgul F5 Props
  • 2 sets of Battery pads
  • 4 x Battery straps
  • 1 Screw bag



Source link

Share it

Leave a Reply

Your email address will not be published. Required fields are marked *